Do you install walls or floor first? Compared to fixing commercial walls, fixing floors is a relatively harder and messier process than fixing the walls. To save on all the cleaning, it would be best to do the floors first. If you do the walls first, you’ll end up hiring someone to clean all the floors once the wall paint is done.
What do you put on first floor or drywall? In standard home construction, the contractor installs the subfloor before installing the drywall. In fact, the subfloor is one of the first features of construction, whereas drywall installation takes place toward the end of the project.
Does the subfloor go under walls? Wall and Floor Basics
Joist: A joist is a long, horizontal piece of wood, usually 2 feet by 8 feet or 2 feet by 10 feet, that holds up the flooring. Subfloor: The subfloor is nailed to the top of the joist. All items except for the underlayment and floor covering rest under and are nailed to the bottom wall plate.
Should drywall touch the floor? 3 Answers. Drywall should definitely not touch concrete as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth. 3/8″ should be sufficient – your prop up plan is not only appropriate, but a common technique used by drywallers.
Do you install walls or floor first? – Related Questions
What’s the average cost to install drywall?
Drywall installation costs $1,843, with a typical range of $1,001 and $2,886. This translates into a price of $1.50 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.
Is replacing subfloor expensive?
Average Cost of Replacing Subfloor. Replacing subfloors will cost between $1.45 and $7 per square foot for materials. Labor costs will be around $27.50 per hour. The project requires the removal of the finished flooring and damaged area and the installation of a new material.
Do you install subfloor before framing?
If your basement renovation is to include a plywood subfloor, or the 2’x2′ subfloor panels, be sure to install the subfloor first, then frame the wall overtop. Having the 2×4 wall sit on the subfloor will protect the lumber from moisture issues or any minor flooding.
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
How much gap should be between sheets of drywall?
Unfortunately, there is no retroactive fix. However, during installation, be diligent about keeping that 1/8-inch space between sheets by using a guide. The blade of a drywall square is about 1/8-inch thick and does the trick. Thin strips of wood can also be used as spacing guides.
How far up from the floor should drywall be?
Drywall is usually installed leaving a gap of about 5/8 inch from the floor. This is done for two reasons, first, it can wick up moisture and begin to deteriorate, which is an obvious problem.
How much should I charge to hang and finish drywall?
On average, it costs between $0.24 and $2.25 per square foot to hang sheetrock, which includes labor. Finishing costs range between $1.00 and $1.65 per square foot on average. In total, prepare to pay between $1.30 and $4.00 per square foot to have sheetrock hung and finished.
How much drywall can man hang in 8 hours?
Each man should be able to hang 35 to 40 sheets an eight hour day.
How much does it cost to drywall a 1000 square foot house?
The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
Does homeowners insurance cover subfloor?
In such cases where the entire subfloor needs replacing, homeowners’ insurance will often cover subfloors’ replacement due to water damage. Be sure to consult with a contractor and your insurance company to determine the necessity and coverage of subfloor replacement for you.
Are rotten floor joists covered by insurance?
Some insurance companies exclude dry/wet rot however it has arisen. Others will cover the cost of joist repairs, if the rot was as a result of an event that your policy covers you for i.e. a leak or burst pipe. If your joists are affected, we will check your policy to see if your insurer should cover this.
Do you nail or screw subfloor?
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
Why does my floor feel spongy?
If the floor feels springy and spongy when you walk, the subfloor might not be completely attached. Another reason for a soft floor could be from overextended joists; meaning the joists holding the house up are too long and not supported enough.
Can I put new subfloor over old subfloor?
One of the benefits of removing the old flooring is it allows you the chance to fix any loose subflooring or squeaks by re-securing the main subfloor to the floor joists prior to installing the new flooring. With all that being said though the answer is YES you can install New Wood Flooring over the old.
Do you screw down DRIcore?
Remember that DRIcore must be installed as a floating floor. Normally it is not recommended to nail, glue or screw DRIcore panels to the concrete surface. In some instances, we suggest minimal fastening of the panels to the concrete surface.
How do you attach a subfloor to a wall?
Nail wall to subfloor using two 16d nails in each stud bay. – If wall is parallel to joists, nail within 1” of sheathing to hit rimboard. – If wall is perpendicular to joists, put two nails through bottom plate into each joist. First, secure the bottom of the wall.
Do I need a subfloor over concrete?
While a subfloor is not necessary to add structural strength when you’ll be laying finish flooring on top of a concrete slab (as in a basement remodel), subflooring over concrete offers two other advantages: A subfloor will help insulate against a concrete floor that becomes overly cold in winter.
Do you hang drywall top to bottom?
When hanging the drywall on the walls, always hang the top sheet first. Raise a sheet tight to the ceiling and secure it with a drywall nail at the top and bottom at each stud. Complete the top row throughout the room before proceeding to the bottom.
Should you stagger drywall joints on walls?
Generally, yes, sheetrock should be staggered. Most drywall contractors recommend staggering sheetrock boards so that the joints in one row do not match up with the joints in the next row, which adds strength to the wall or ceiling and helps minimize cracks.
How many screws go into a 4×8 sheet of drywall?
How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
Do you leave a gap between drywall and floor?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.