Do you need special saw blade to cut composite decking?

Do you need special saw blade to cut composite decking? Mark the composite deck pieces to eliminate the need to guess where you should cut. You may use any conventional wood saw, but make sure that it’s sharp and well-maintained. We recommend a medium-tooth saw blade, whether you’re using a miter saw or a circular saw.

What is the best saw blade for cutting composite decking? Diablo’s Trex Blade Circular Saw Blades

Diablo’s TrexBlade is the only blade recommended for composite decking materials by the Trex Company.

Do you need a special saw blade to cut composite deck boards? Yes, you can cut most composite decking just like wood — no special tools required.

Can you cut composite decking with a regular blade? In general, most types of blades will work for composite decking. But if you want faster cutting, you may use saw blades with medium to high teeth count. The more the teeth, the more accurate and smooth the cuts are.

Do you need special saw blade to cut composite decking? – Related Questions

Should you pre drill composite decking?

The answer is yes for a solid composite decking (must be pre-drill and must check with manufacture). You can not drill or screw through a hollow composite deck as the screw will become loose and rise in time . Like the usual wooden decking boards, you can also screw down a solid composite decking.

How many teeth do I need to cut composite decking?

The EnviroBuild installation guide advises the use of a circular saw using a 40 tooth alternate top bevel finish blade to cut your composite decking boards.

Can composite decking be ripped?

Trex products should not be ripped to reduce thickness, but can be ripped to reduce width. As long as the board can still be installed per the installation instructions, the warranty will be valid. Please use care when fastening ripped boards, as pre-drilling may be necessary.

What saw is best for cutting decking?

A reciprocating saw comes in handy for cutting the deck posts to length or for trimming off joists when they are in position. This is much easier than sawing by hand! The chop saw is also the saw of choice for cutting deck boards.

How do you hide the edges of a composite deck?

The question is, how do you hide the ends of composite decking? There are several ways to go about it. Some of your options include picture framing, installing fascia boards, coating the ends with paint, using end caps and plugs, or edging your ground-level deck with stone.

Why is my composite deck warping?

The cause of warping in decking is a thermal expansion or changing temperature. Your plastic wood composite will warp if your decking boards absorb heat and expand. The heat will cause a household material to become flexible or soft. When the decking is flexible when hot, it will eventually become cool.

Do you countersink composite deck screws?

You can screw or nail composite decking boards just like wood ones. You can countersink a hole about 1/4 inch deep for each screw before you drive it, however, to ensure the head sinks below the surface. Drive the screws in pairs, each 1 inch from the edge of a board and about 1/2 inch from either end.

What kind of screws should I use for composite decking?

Composite decking screws

If you opt for composite deck screws, be sure to use stainless steel screws that will not rust or corrode. Select a minimum size of #8 x 2.5 in.

How long do composite decks last?

Composite decking requires minimal upkeep and can last between 25 and 30 years. On average, plastic decking has a similar lifespan to composite decking and can last nearly 30 years.

Which saw should I buy first?

A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.

Can you use a Mitre saw to cut decking?

Mitre saw rails are useful because they extend the cutting width and allow you to work on larger pieces of wood. They’re a great tool for cutting larger material such as worktops, boards, decking and sheet materials.

Which power tool is used in cutting boards and plywood?

There may be no more versatile basic handheld power tool than a circular saw. When used with a clamp-on straight-edge, the circular saw can be just about as accurate as a table saw and handle quite a few of the same tasks, including cutting sheet goods such as plywood or medium-density fiberboard (MDF).

Is a composite deck worth the money?

There is no doubt that composite decking material is more expensive than wood. However, it is valued for its striking resemblance to natural wood and efficiency making it an excellent choice for decking. It is easier to clean and maintain which makes it last long enough to transfer the same value to the next homeowner.

What is the most affordable composite decking?

Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.

How do you finish the edge of a Trex deck?

Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.

Do you have to picture frame composite decking?

Many PVC and Trex composite decking products are not the same color all the way through, so you’ll want to cover the ends. One solution is to “picture frame” the deck by installing Trex deck boards around the perimeter. Pro tip: A picture frame creates a professional look but does require additional framing.

Can composite decking be put directly on the ground?

Composite lumber is an appropriate material for ground contact. Composite lumber is made from wood fiber or other fillers such as fiberglass or rice hulls, and plastic material. Composite lumber is highly resistant to rot and insects, making it a suitable choice for ground contact, under the right circumstances.

Can you replace wood deck boards with composite?

Wood can be replaced with composite boards on a one-to-one basis, and when properly installed will last against the elements.

Does composite deck warp?

Most composite deck boards will be much longer than wooden boards, because there is no fear of warpage. Your composite deck may not warp, but it can sag and buckle. Most sagging is caused by improper spacing between the joists when it is installed.

Do composite decks get hot?

But how hot can composite decking get in the sun? One study found that in direct sunlight, composite decks can reach temperatures from 34° to 76° F hotter than the surrounding air. On an 80° day, that could mean a deck surface temperature of more than 150°.

Should you nail or screw deck boards?

For the decking boards, many agree that screws perform better than nails. They have better tensile strength and will less likely to pop out, which is a common problem in decking. Many also agree that nails are better used for the frame of the deck.