How do I lower the temperature on my Kitchenaid refrigerator?

How do I lower the temperature on my Kitchenaid refrigerator? If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature. To make the Refrigerator colder, adjust the control to the next higher setting. To make the Refrigerator less cold, adjust the control to the next lower setting.

What should a KitchenAid refrigerator be set at? However, if your KitchenAid fridge is too cold, you must remember the following; Under most conditions, the perfect temperature is between 35°F and 37°F. Check that you are looking at the setting for the fridge and not the freezer.

How do I lower my refrigerator temperature? Adjusting Refrigerator Temperature

Place the thermometer in a glass of water, then position the glass in the center of your fridge. Check the temperature after five to eight hours. If it is higher than 40 degrees, adjust the baffle knob to allow more cold air into your fridge and reduce the temperature.

How do I adjust the temperature on my KitchenAid refrigerator? If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature. To make the Refrigerator colder, adjust the control to the next higher setting. To make the Refrigerator less cold, adjust the control to the next lower setting.

How do I lower the temperature on my Kitchenaid refrigerator? – Related Questions

How do I run a diagnostic on my KitchenAid refrigerator?

To enter the diagnostics mode: Press the control POWER button and the water filter RESET button simultaneously for 3 seconds. To advance the diagnostics sequence: To advance to the next step in the sequence, press and hold the water filter reset button for 2 seconds or until it beeps.

Why is my KitchenAid refrigerator not keeping cold?

#1 Refrigerator Condenser Coils Dirty

This is a pretty common cause for a KitchenAid refrigerator not cooling. The condenser cools are responsible for dispersing heat. If this is the problem, clean the refrigerator condenser coils so they can get back to work.

What does over temperature mean on KitchenAid refrigerator?

The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F (-9°C) for longer than 1¹⁄₂ hours. If the temperature does not return to normal, refer to the “Temperature Concerns” section in this troubleshooting guide.

Why is my fridge temperature too high?

Another common cause of a refrigerator that’s too hot is a faulty evaporator fan. The evaporator fan is located in the freezer compartment and circulates cold air throughout the refrigerator when its compressor is running. Be sure to check the fan for excessive frost, and check the fan blades for any damage.

Is 6 degrees too warm for a fridge?

Experts say the optimum overall temperature for a household fridge is between 0c and 4c. ‘Keeping your fridge below four degrees centigrade — but not below zero, the freezing temperature of water, which will turn the water in foods to ice — will ensure that it stays fresh for longer. ‘

What is the best temp for a refrigerator?

Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.

How do I reset my KitchenAid refrigerator?

Reset a KitchenAid Refrigerator

According to KitchenAid, the filter status light can be reset by pressing the filter reset button on the display and holding it until the light turns off. This will reset the refrigerator’s system. You can also press the water filter button for three seconds.

What happens when a defrost thermostat goes bad?

A faulty defrost termination thermostat may result in the defrost heater never heating and a solid frost buildup on the evaporator coil, which results in too warm temperatures. The thermostat contacts are normally closed and have continuity until it reaches 140 degrees.

Is 5 or 1 colder on a fridge?

On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.

Is 1 or 7 the coldest setting on a fridge?

1 is the warmest, 7 is the coldest, and 0 is Off. At first, set the dial to 4 and allow 24 hours to pass before adjusting the temperature to your needs.

Does refrigerator have a reset button?

Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.

What would cause a refrigerator to stop getting cold?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it’s stuck.

How long do KitchenAid refrigerators last?

How long do KitchenAid refrigerators last? The average life span of a KitchenAid refrigerator is between 15 and 17 years.

Why would my refrigerator stop cooling and then start working again?

If the thermostat is adjusted incorrectly, the fridge will turn off and turn on again when the temperature increases. The compressors are responsible for providing power for the cooling process. In this case, it is suggested that you lower the thermostat setting to ensure the compressor keeps working properly.

How long does a KitchenAid fridge take to get cold?

If your controls need to be adjusted, adjust the temperature one setting colder and wait 24 hours for the compartments to cool.

What does the code Po mean on a KitchenAid refrigerator?

Power Outage: The Power Outage indicator lets you know if the power supply to the refrigerator has been off and the freezer temperature has risen to 18°F (-8°C) or higher. The control panel temperature display will read “PO,” and an alert tone will sound three times.

How do you turn off the alarm on a KitchenAid refrigerator?

The Door Ajar Alarm feature sounds an alarm when the refrigerator door(s) or freezer drawer is left open for 2-5 minutes, depending on the model, and cooling is turned on. The alarm will repeat every 2 minutes. Close all doors to turn off and reset the alarm.

Does cleaning condenser coils help fridge?

Dirty coils force a fridge to work harder keeping food cold, resulting in higher energy costs and a reduced lifespan for the pricey appliance. Fortunately, cleaning your refrigerator’s condenser coils is a simple task for do-it-yourselfers.

What temperature is too warm for a refrigerator?

Before using any foods, check your refrigerator and freezer thermometers. If the fridge is still at or below 40 °F, or the food has been above 40 °F for only 2 hours or less, it should be safe to eat.

What is the danger zone temperature?

What is the Danger Zone? As the name suggests, the danger zone refers to a temperature range that’s dangerous for foods to be held at. And that range is between 40°F and 140°F.

Why is my food freezing in my refrigerator?

The optimum temperature range for storing fresh food is between 38 – 40 degrees Fahrenheit. If your food is freezing, then it is possible that your fridge’s temperature setting was accidentally set too low. This is a common problem that can lead to your refrigerator freezing food.