How do you use the revolve feature in SolidWorks?

How do you use the revolve feature in SolidWorks?

What does the revolve feature do? The Revolve feature can be found on the Sketch or Feature toolbar. Revolve rotates Faces, Sketch regions, Edges, and Sketch curves about a central axis in order to create, add to, remove, or intersect a part.

What is needed to revolve a feature? A revolved feature is an axisymmetric shape that is created by revolving an open or closed section view by a specified angle around a central axis. The section can represent a protrusion or a cut, that is, it can either add material or take it away.

Why can’t I revolve in SolidWorks? Listen to SolidWorks

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

What is revolved boss in SolidWorks? To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

How do you use the revolve feature in SolidWorks? – Additional Questions

Can you revolve a 3D sketch in SolidWorks?

In solidwork we cannot use the Revolve command in 3D sketching as we want to draw everything with 3D sketching. I am going to use two Extrudes to create the desired shapes. To make a 3D sketch on a specific surface, click on the surface then go to sketch and select 3D Sketch On Plane.

How does the revolve tool work?

You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Select the filling of the closed sketch. Select the axis to revolve around. The filling is immediately revolved 360 degrees around the axis.

What is revolve command?

REVOLVE ignores the width of a polyline and revolves from the center of the path of the polyline. The right-hand rule determines the positive direction of rotation. The following prompts are displayed. Objects to Revolve. Specifies the objects to be revolved about an axis.

What is revolve boss?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

Which choice is not a fillet type in Solidworks?

Question: Which choice is NOT a fillet type in SOLIDWORKS? constant size variable size face angled.

How do you chamfer in Solidworks?

To create a chamfer: Click Chamfer (Features toolbar) or Insert > Features > Chamfer. Under Chamfer Parameters, select an item and set parameters. Some fields that accept numeric input allow you to create an equation by entering = (equal sign) and selecting global variables, functions, and file properties from a list.

What is a self intersecting contour?

“Self Intersecting contour” means a closed-loop polygon of the same the beginning and the end position and intersected with self-line in between. If there is such a polygon, the entire area might not be able to be filled well when the gerber output.

How do you make a 3D sketch in Solidworks?

To create a 3D sketch, click 3D Sketch (Sketch toolbar) or Insert > 3DSketch . You can create 3D sketch entities on a working plane, or at any arbitrary point in 3D space. In 3D sketching, a graphical space handle helps maintain your orientation while you sketch on several planes.

How many sketches are required to create a simple swept feature?

3 Unlike an extruded feature, a swept feature requires a minimum of two sketches.

What is sweep in Solidworks?

A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.

How many sketches do we need to use the feature lofted boss in Solidworks?

Sketch your profiles.

A minimum of two are required but a higher number of profiles allows you to create more complex shapes. Ideally profiles should be closed but Thin Feature Lofts can be created.

Can you do a lofted cut in Solidworks?

Click Lofted Boss/Base on the Features toolbar, or click Insert, Boss/Base, Loft. Click Lofted Cut on the Features toolbar, or click Insert, Cut, Loft. Click Lofted Surface on the Surfaces toolbar, or click Insert, Surface, Loft.

Which choice is an example of a sketched feature?

Sketched features require the use of a sketch in order to be created, and include features such as Extruded Boss/Cut, Revolved Boss/Cut and many others. Applied features do not require a sketch, and are applied directly to existing geometry. Shell and Fillet features fall into this category.

How do you sketch a revolve?

How do you sketch a revolve?

What does revolve mean Onshape?

Revolve Modeling: allows the user to create a profile and spin that profile around an axis line (As opposed. to extruding where the user extrudes in a direct linear direction (up/down, left/right, or. forward/backward). Revolve parts are used for symmetrically cylindrical parts (i.e cups, pots, crazy straws, tires, etc

What are datum planes used for?

Datum planes are features used to provide references for other features, like sketching planes, dimensioning references, view references, assembly references, and so on. Datum planes are not physical parts of the model, but are used to aid in model creation. A datum is a plane that extends off to infinity.

What is loft boss base feature and also write its use?

Loft Boss or base is SolidWorks Features tool (like Extrude Boss, Revolved Boss, Sweep Boss etc), which mainly helps to add materials between two or more profiles with ease.

What is the Extrude command in AutoCAD?

The Extrude command in AutoCAD 3D is used to create a surface or solid of a 2D surface or a 3D curve. Consider the below image: The Extrude command is widely used to create walls, shapes, etc. Let’s understand by few examples.

Does sweep mean?

1 to clean or clear (a space, chimney, etc.) with a brush, broom, etc. 2 often foll by: up to remove or collect (dirt, rubbish, etc.)

Can you revolve a spline?

Presumably the spline is the tube centreline? Revolve will only work with a straight line axis. If you are sweeping a circle along the spline and it is red then it is self-intersecting – try a smaller diameter circle.

Leave a Comment

Your email address will not be published. Required fields are marked *